View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tisoplen® D 10D03 R01 - PP-GF10 - Tisan Engineering Plastics Co.Ltd.

Material Data Center offers the following functions for Tisoplen® D 10D03 R01:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tisoplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección

Any use of this information falls under the rules of our disclaimer.

Propiedades mecánicas

Valor

Unidades

Método de ensayo

ISO Data

Módulo de tracción

2750

MPa

ISO 527

Resistencia a la tracción

MPa

ISO 527

Alargamiento a rotura

ISO 527

Resistencia al impacto Izod con entalla, +23°C

kJ/m²

ISO 180/1A

Propiedades térmicas

Valor

Unidades

Método de ensayo

ISO Data

Temperatura de fusión, 10°C/min

163

°C

ISO 11357-1/-3

Estabilidad al calor, 1.80 MPa

110

°C

ISO 75-1/-2

Combustibilidad a 1.5mm esp. nom.

class

IEC 60695-11-10

Espesores de probeta

1.6

Combustibilidad a espesor h

class

IEC 60695-11-10

Espesores de probeta

0.8

Propiedades eléctricas

Valor

Unidades

Método de ensayo

ISO Data

Resistividad volumétrica específica

1E13

Ohm*m

IEC 62631-3-1

Resistividad superficial específica

1E15

Ohm

IEC 62631-3-2

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	980	kg/m³	ISO 1183

Recomendación para procesamiento Moldeo por inyección	Valor	Unidades	Método de ensayo
Temperatura de pre-secado	80	°C	-
Tiempo de pre-secado	1	h	-
Temperatura de la masa	210 - 230	°C	-
Temperatura del molde	20 - 50	°C	-
Zona 1	150 - 180	°C	-
Zona 2	200 - 240	°C	-
Zona 3	200 - 240	°C	-
Temperatura de boquilla	230	°C	-
Contrapresión	0.3 - 2	MPa	-

Características

Procesamiento y forma de entrega

Moldeo por inyección

Forma de suministro

Sémola, Color natural

Disponibilidad regional

Europa, Próximo Oriente/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.