Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Topas® 8007F-04 - COC - Topas Advanced Polymers

Material Data Center offers the following functions for Topas® 8007F-04:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Topas datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades térmicas - Propiedades opticas - Otras propiedades - Propiedades mecánicas (Film) - Recomendación para procesamiento Extrusión
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 12 cm³/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temp. de transición vítrea, 10°C/min 78 °C ISO 11357-1/-2
Propiedades opticasValorUnidadesMétodo de ensayo
ISO Data
Brillo, 60° 100 - ISO 2813
Niebla 1 - ISO 14782
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1010 kg/m³ ISO 1183
Propiedades mecánicas (Film)ValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción, paralelo 2200 MPa ISO 527-3
Módulo de tracción, normal 1800 MPa ISO 527-3
Resistencia a la tracción, paralelo 57 MPa ISO 527-3
Resistencia a la tracción, normal 50 MPa ISO 527-3
Alargamiento máximo, paralelo 2.9 % ISO 527-3
Alargamiento máximo, normal 3 % ISO 527-3
Tipo de extrusión colada - -
Espesor de la muestra 0.07 mm -
Recomendación para procesamiento ExtrusiónValorUnidadesMétodo de ensayo
Type of extrusion film - -
Temperatura - zona de alimentación 20 - 60 °C -
Zona 1 210 - 220 °C -
Zona 2 230 - 240 °C -
Zona 3 230 - 240 °C -
Zona 4 230 - 240 °C -
Temperatura de boquilla 230 - 240 °C -
Características
Procesamiento y forma de entrega
Extrusion del film, Otros tipos de extrusión, Termoconformación
Características
Propiedades de barrera
Certifications
Contacto con alimentos
Applicaciones
Médico, Empacado
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.