Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ TXF1021 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ TXF1021:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Texto del producto

Eastman Tritan™ Copolyester TXF1021 is an amorphous, opaque material offering UL-94 V2 performance with outstanding aesthetics and gloss. Eastman Tritan™ Copolyester TXF1021 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability.

Eastman Tritan™ Copolyester TXF1021 offers improved design flexibility needed in portable consumer electronic devices. Eastman Tritan™ Copolyester TXF1021 has passed FDA/ISO 10993 testing for skin sensitization. Eastman Tritan™ Copolyester TXF1021 contains a non-halogenated flame retardant.

Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Contracción posterior al moldeo, paralelo 0.006 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 1611 MPa ASTM D 638
Esfuerzo de fluencia a tracción 42 MPa ASTM D 638
Esfuerzo de fractura a tracción 46 MPa ASTM D 638
Alargamiento a la fluencia 6 % ASTM D 638
Alargamiento a la rotura 133 % ASTM D 638
Módulo de flexión 1743 MPa ASTM D 790
Dureza Rockwell R 109 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 436 J/m ASTM D 256
Resistencia al impacto Izod, 1/8 in N J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Combustibilidad UL 94 V-2 - UL 94
Espesores de probeta 1.5 mm -
Estabilidad al calor @ 66 psi 94 °C ASTM D 648
Estabilidad al calor @ 264 psi 83 °C ASTM D 648
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1190 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 88 °C -
Tiempo de pre-secado 4 - 6 h -
Temperatura de la masa 260 - 282 °C -
Temperatura del molde 38 - 66 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Color natural
Aditivos
Ignifugante
Características especiales
Resistencia mejorada al fuego, Sin halógeno, Estable contra el calor, Opaque
Características
Amorfo, High Gloss, Copolímero
Resistencia quimica
Resistencia química general, Estabilidad hidrolitica
Applicaciones
Electrica
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.