Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Venelene® 11PG4 - (PE-LLD) - Poliolefinas Internacionales, C.A.

Material Data Center offers the following functions for Venelene® 11PG4:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Venelene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades opticas - Otras propiedades - Propiedades mecánicas (Film)
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 1.1 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Opacidad 15 % ASTM D 1003
Transmitancia luminosa 80 % ASTM D 1003
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 920 kg/m³ ASTM D 792
Propiedades mecánicas (Film)ValorUnidadesMétodo de ensayo
ASTM Data
Esfuerzo de fractura a tracción, long. 35 MPa ASTM D 882
Esfuerzo de fractura a tracción, normal 30 MPa ASTM D 882
Alargamiento a la rotura, long. 700 % ASTM D 882
Alargamiento a la rotura, normal 800 % ASTM D 882
Espesor de la muestra 0.035 mm -
Características
Procesamiento y forma de entrega
Extrusión de película soplada
Aditivos
Agente antibloqueo
Características
Antideslizante
Certifications
Contacto con alimentos, Aprobado por el FDA 21 CFR
Applicaciones
Uso general
Disponibilidad regional
América del Sur y Centroaméric
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.