Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Venuz BD 287 - PET - Selenis Portugal, S.A.

Material Data Center offers the following functions for Venuz BD 287:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Venuz datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Propiedades térmicasValorUnidadesMétodo de ensayo
Other Standards[S]
Temperatura de transición vítrea 85 °C ASTM D 3418
S: These properties are reported by the producer according standards that are different to our defaults.
Otras propiedadesValorUnidadesMétodo de ensayo
Viscosidad intrínseca 0.72 dl/g -
Densidad 1270 kg/m³ ASTM D 792
Color L 64 - CIE
Color b 1 - CIE
Moisture Content 0.3 % -
Bulk Density 730 kg/m³ -
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 65 °C -
Tiempo de pre-secado 5 - 6 h -
Humedad de procesamiento ≤0.004 % -
Temperatura de la masa 180 - 250 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección, Otros tipos de extrusión, Moldeo por soplado
Forma de suministro
Sémola
Características especiales
Alto impacto o modificado al impacto, Transparente
Características
Amorfo, Propiedades de barrera, Bajo olor, Copolímero
Resistencia quimica
Resistencia química general
Certifications
Contacto con alimentos, Aprobación a contacto con alimentos 10/2011, Aprobado por el FDA 21 CFR
Applicaciones
Empacado
Disponibilidad regional
Norteamérica, Europa, América del Sur y Centroaméric
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.