Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAKEEP® iC4800 3DF - PEEK-MX - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAKEEP® iC4800 3DF:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestakeep datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
It contains calcium phosphates to enhance osseointegration.
Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 10 / * cm³/10min ISO 1133
Temperatura 380 / * °C -
Carga 5 / * kg -
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 4350 / - MPa ISO 527
Esfuerzo de tracción 90 / - MPa ISO 527
Esfuerzo de fluencia 90 / - MPa ISO 527
Alarg. en límite elástico 4 / - % ISO 527
Alargamiento a rotura 10 / - % ISO 527
Resistencia al impacto Charpy c/entalla, +23°C 4.7 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 340 / * °C ISO 11357-1/-3
Temp. de transición vítrea, 10°C/min 145 / * °C ISO 11357-1/-2
ASTM Data
Temperatura de fusión 340 °C ASTM D 3418
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de agua 0.4 / * % Sim. to ISO 62
Densidad 1460 / - kg/m³ ISO 1183
Densidad 1460 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Additive Manufacturing
Forma de suministro
Monofilamento, Color natural
Características especiales
Sin fósforo, Alto impacto o modificado al impacto, Estable contra rayos U.V./interperie, Estable contra el calor, Opaque
Características
Bajo olor, Estabilidad térmica
Resistencia quimica
Resistencia al ácido, Resistencia química general, Resistencia a solventes, Estabilidad hidrolitica, Resistencia a la oxidación, Resistencia a la radiacion
Certifications
Grado médico, Biocompatibility ISO 10993, USP Class VI
Applicaciones
Electrica, Médico
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.