Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® 20NSP - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® 20NSP:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Vydyne 20NSP is a general-purpose, highly nucleated, lubricated PA66 resin with a further enhanced crystallization temperature. Designed to crystallize rapidly in order to reduce cycle times and increase productivity through faster part set-up.
Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Contracción posterior al moldeo, paralelo 1.3 / * % ISO 294-4, 2577
Contracción posterior al moldeo, normal 1.7 / * % ISO 294-4, 2577
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 3400 / 2300 MPa ISO 527
Esfuerzo de fluencia 95 / 67 MPa ISO 527
Alarg. en límite elástico 5.2 / 18 % ISO 527
Resistencia al impacto Charpy, +23°C N / N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy, -30°C N / N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 4 / 4 kJ/m² ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C 3 / 3 kJ/m² ISO 179/1eA
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 262 / * °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 78 / * °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 232 / * °C ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo 100 / * E-6/K ISO 11359-1/-2
Coef.de expansión térmica lineal, normal 100 / * E-6/K ISO 11359-1/-2
Combustibilidad a 1.5mm esp. nom. V-2 / * class IEC 60695-11-10
Espesores de probeta 1.5 / * mm -
Combustibilidad a espesor h V-2 / * class IEC 60695-11-10
Espesores de probeta 0.4 / * mm -
Yellow Card disponible sí / * - -
Combustibilidad según índice de oxigeno 26 / * % ISO 4589-1/-2
Propiedades eléctricasSeco / CondUnidadesMétodo de ensayo
ISO Data
Resistividad volumétrica específica 1E11 / - Ohm*m IEC 62631-3-1
Indice comparativo de linea de fuga 600 / - - IEC 60112
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de agua 1.64 / * % Sim. to ISO 62
Absorción de humedad 2.4 / * % Sim. to ISO 62
Densidad 1140 / - kg/m³ ISO 1183
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola, Color natural
Aditivos
Lubricante, Desmoldeante
Características
Cristalinidad alta, Nucleado
Resistencia quimica
Resistencia química general
Certifications
Contacto con alimentos, Aprobación a contacto con alimentos 10/2011, Aprobado por el FDA 21 CFR, Contacto con agua potable, Contacto con agua potable NSF 61
Applicaciones
Electrica, Uso general
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.