Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DURANEX® 330HR - PBT-GF30 - Polyplastics

Material Data Center offers the following functions for DURANEX® 330HR:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Duranex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Résistance à la traction 149 MPa ISO 527
Déformation à la rupture 2.6 % ISO 527
Module de flexion, 23°C 9100 MPa ISO 178
Résistance à la flexion 230 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 11 kJ/m² ISO 179/1eA
Dureté Rockwell M 100 - ISO 2039-2
ASTM Data
Module de traction 147 MPa ASTM D 638
Module de flexion 9310 MPa ASTM D 790
Résistance à la flexion 225 MPa ASTM D 790
Izod choc avec entaille, 1/4 in 94.2 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 209 °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 20 E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 90 E-6/K ISO 11359-1/-2
Inflammabilité pr. épaisseur h HB class IEC 60695-11-10
Yellow Card disponible oui - -
ASTM Data
DTUL à 264 psi 213 °C ASTM D 648
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Résistivité transversale 2E14 Ohm*m IEC 62631-3-1
Rigidité diélectrique 26 kV/mm IEC 60243-1
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1530 kg/m³ ISO 1183
Densité 1530 kg/m³ ASTM D 792
Caractéristiques
Résistance Chimique
Stabilité hydrolytique
Disponibilité régionale
Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.