Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Eastar™ A150 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Eastar™ A150:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Eastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés thermiques - Propriétés optiques - Propriétés diverses - Propriétés mécaniques (Grades film)
Any use of this information falls under the rules of our disclaimer.
Informations produit

Eastar™ A150 Copolyester is a poly(1,4-cyclohexylene-dimethylene terephthalate/isophthalate). It is produced by reacting terephthalic acid and isophthalic acid with the glycol 1,4-cyclohexanedimethanol. Eastar™ A150 is

intended primarily for extrusion into film and sheeting for packaging applications. It has excellent hydrolytic stability and good heat stability. Eastar™ A150 copolyester is lawful for use in food contact applications under food additive regulations published at 21 CFR 177.1240 by the Federal Food and Drug Administration. Therefore, it is lawful for use as a packaging material for meat or poultry foods prepared under federal inspection of the U.S. Department of Agriculture regulations at 9 CFR 318.7 and 381.147.




Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
Température de fusion 261 °C ASTM D 3418
Température de transition vitreuse 91 °C ASTM E 1356
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Brillant 108 - ASTM D 2457
Haze 0.5 % ASTM D 1003
Lumière á Transmittance 93 % ASTM D 1003
Propriétés diversesValeurUnitéNorme du test
Densité 1200 kg/m³ ASTM D 792
Bulk Density 670 kg/m³ -
Propriétés mécaniques (Grades film)ValeurUnitéNorme du test
ASTM Data
Module en traction, long. 1600 MPa ASTM D 882
Module en traction, trav. 1600 MPa ASTM D 882
Module de traction d’élasticité, long. 43 MPa ASTM D 882
Module de traction d’élasticité, trav. 43 MPa ASTM D 882
Résistance de traction à la rupture, long. 56 MPa ASTM D 882
Résistance de traction à la rupture, trav. 56 MPa ASTM D 882
Allongement d’élasticité, long. 5 % ASTM D 882
Allongement d’élasticité, trav. 5 % ASTM D 882
Allongement à la rupture, long. 250 % ASTM D 882
Allongement à la rupture, trav. 250 % ASTM D 882
Epaisseur des eprouvettes 0.28 mm -
Caractéristiques
Transformation
Extrusion de films, Extrusion de plaques
Propriétés spéciales
Stabilisé à la chaleur, Transparent
Caractéristiques
Copolymère
Résistance Chimique
Stabilité hydrolytique
Certifications
Contact alimentaire, FDA 21 CFR approbation
Applications
Emballage
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.