Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Flomat 700/30 - UP-GF30 - Devi Polymers Private Limited

Material Data Center offers the following functions for Flomat 700/30:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Flomat datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
Other Standards[S]
Retrait au moulage, parallèle 0.1 % BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés mécaniquesValeurUnitéNorme du test
Other Standards[S]
Résistance à la traction 78 MPa BS-2782
Résistance à la flexion 118 MPa BS-2782
Résistance de compression 177 MPa BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
UL 94 inflammabilité V-0 - UL 94
Propriétés électriquesValeurUnitéNorme du test
ASTM Data
Résistance à l’arc 185 s ASTM D 495
Other Standards[S]
Résistivité transversale 1E11 Ohm*m DIN 53482
Résistivité superficielle 1E12 Ohm DIN 53482
Rigidité diélectrique 10 kV/mm BS 2782
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés diversesValeurUnitéNorme du test
Other Standards[S]
Absorption d'eau 0.2 % BS-2782
Masse volumique 1700 kg/m³ BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
Caractéristiques
Transformation
Moulage par compression
Conditionnement
Moulage en feuille
Disponibilité régionale
Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.