Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® ICE 504L - PPS-GF40 - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

FORTRON ICE 504L is a 40% glass fiber reinforced polyphenylene sulfide, that belongs to our new generation of Fortron® PPS.
This new technology allows optimization of molding conditions with faster cycle times. Due to the faster crystallization of the material at a higher temperature, the option of mold wall temperature reduction can be subject of advanced process optimization. The potential for optimization of Fortron® ICE by cycle time reduction is possible by standard cavity surface temperatures of 140°C. The potential for lowering the mold temperature must be checked individually and it depends on process and part design.
 

Flammability @1.6mm nom. thickn.	V-0	-
Flammability at thickness h (0.38 mm)	V-0	-

Caractéristiques des transformations/physiques	Valeur	Unité	Norme du test
ISO Data
Retrait au moulage, parallèle	0.3	%	ISO 294-4, 2577
Retrait au moulage, perpendiculaire	0.6	%	ISO 294-4, 2577
Chaleur spécifique du fondu	1500	J/(kg K)	-

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Module en traction	15100	MPa	ISO 527
Contrainte à la rupture	202	MPa	ISO 527
Déformation à la rupture	1.9	%	ISO 527
Résistance au choc Charpy, +23°C	53	kJ/m²	ISO 179/1eU
Résistance au choc Charpy, -30°C	53	kJ/m²	ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C	10	kJ/m²	ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C	10	kJ/m²	ISO 179/1eA

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	280	°C	ISO 11357-1/-3
Température de transition vitreuse, 10°C/min	90	°C	ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa	270	°C	ISO 75-1/-2
Température de fléchissement s/chrg, 8.00 MPa	215	°C	ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle	26	E-6/K	ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend.	42	E-6/K	ISO 11359-1/-2
Inflammabilité ep. nom. 1.5 mm	V-0	class	IEC 60695-11-10
Epaisseur de l'éprouvette	1.5	mm	-
Inflammabilité pr. épaisseur h	V-0	class	IEC 60695-11-10
Epaisseur de l'éprouvette	0.4	mm	-
Aptitude à l'allumage	47	%	ISO 4589-1/-2

Propriétés électriques	Valeur	Unité	Norme du test
ISO Data
Permittivité relative, 1MHz	4.1	-	IEC 62631-2-1
Facteur de pertes, 1MHz	20	E-4	IEC 62631-2-1
Résistivité transversale	>1E13	Ohm*m	IEC 62631-3-1
Résistivité superficielle	>1E15	Ohm	IEC 62631-3-2

Propriétés diverses	Valeur	Unité	Norme du test
Absorption d'eau	0.02	%	Sim. to ISO 62
Masse volumique	1650	kg/m³	ISO 1183

Fonctions

Caractéristiques

Transformation

Moulage par injection

Conditionnement

Granulés

Additifs

Agent de démoulage

Certifications

Contact avec l'eau potable

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.