Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® FX72T6 - PPS - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

Fortron^® FX72T6 is an unreinforced, impact modified PPS with high flowability and high impact resistance suitable for injection molding.
The mechanical properties reported on this data sheet refer to a mold wall temperature of 135°C.

Flammability at thickness h (3 mm)

V-0

-

Caractéristiques des transformations/physiques	Valeur	Unité	Norme du test
ISO Data
Retrait au moulage, parallèle	1.3	%	ISO 294-4, 2577
Retrait au moulage, perpendiculaire	1.3	%	ISO 294-4, 2577

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Module en traction	1680	MPa	ISO 527
Contrainte à la rupture	40	MPa	ISO 527
Déformation à la rupture	20	%	ISO 527
Résistance au choc Charpy, +23°C	N	kJ/m²	ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C	10	kJ/m²	ISO 179/1eA

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa	100	°C	ISO 75-1/-2
Température de ramolliss. Vicat, B	122	°C	ISO 306
Inflammabilité pr. épaisseur h	V-0	class	IEC 60695-11-10
Epaisseur de l'éprouvette	3.0	mm	-
Aptitude à l'allumage	48.5	%	ISO 4589-1/-2

Propriétés électriques	Valeur	Unité	Norme du test
ISO Data
Permittivité relative, 1MHz	3.1	-	IEC 62631-2-1
Facteur de pertes, 1MHz	3	E-4	IEC 62631-2-1

Propriétés diverses	Valeur	Unité	Norme du test
Masse volumique	1180	kg/m³	ISO 1183

Fonctions

Caractéristiques

Transformation

Moulage par injection

Propriétés spéciales

Modifié choc

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.