Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of G-PAEK™ 1230GF - PEK-GF30 - Gharda Plastics Limited

Material Data Center offers the following functions for G-PAEK™ 1230GF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other G-PAEK datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Retrait au moulage , parallèle 0.003 mm/mm ASTM D 955
Retrait au moulage, perpendiculaire 0.01 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module en traction 11500 MPa ASTM D 638
Module de traction 185 MPa ASTM D 638
Allongement à la rupture 2.5 % ASTM D 638
Module de flexion 10500 MPa ASTM D 790
Résistance à la flexion 280 MPa ASTM D 790
Dureté Rockwell M 105 - ASTM D 785
Dureté D Shore 90 - ASTM D 2240
Izod choc avec entaille, 1/8 in 60 J/m ASTM D 256
Résistance au choc Izod, 1/8 in 610 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
UL 94 inflammabilité V-0 - UL 94
Épaisseur testée 0.8 mm -
DTUL à 264 psi 360 °C ASTM D 648
Température de fusion 372 °C ASTM D 3418
Température de transition vitreuse 152 °C ASTM E 1356
Propriétés électriquesValeurUnitéNorme du test
ASTM Data
Rigidité diélectrique, peu de temps 14 kV/mm ASTM D 149
Résistance de la surface >1E15 Ohm ASTM D 257
Résistance volumique >1E15 Ohm*cm ASTM D 257
Résistance à l’arc 160 s ASTM D 495
Propriétés diversesValeurUnitéNorme du test
Densité 1500 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Grains
Propriétés spéciales
Ignifugé, Stabilisé à la chaleur
Résistance Chimique
Résistance chimique générale
Applications
Médical
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.