Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOSTAFORM® C 9021 SW XAP®2 LS - POM - Celanese

Material Data Center offers the following functions for HOSTAFORM® C 9021 SW XAP®2 LS:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Hostaform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Fonctions
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 7 cm³/10min ISO 1133
Température 190 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2700 MPa ISO 527
Contrainte d'écoulement 52 MPa ISO 527
Déformation au seuil d'écoulement 7 % ISO 527
Déformation nominale à la rupture 16 % ISO 527
Résistance au choc Charpy, +23°C 90 kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C 85 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 4 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 4 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 166 °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 80 °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 120 E-6/K ISO 11359-1/-2
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1420 kg/m³ ISO 1183
Fonctions
Module de cisaillement dynamique / Température , HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
Contrainte / Déformation , HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
Module sécant / Déformation , HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
Contrainte / Déformation (isochrone) 23°C, HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
Module de fluage / Temps 23°C, HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
Courbe de fluage 23°C, HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
Caractéristiques
Transformation
Moulage par injection, Extrusion (autres)
Conditionnement
Granulés
Additifs
Lubrifiant, Agent de démoulage
Caractéristiques
Copolymère
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.