Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hostalen QCP 5404 Ivory  - (PE-HD) - LyondellBasell Industries

Material Data Center offers the following functions for Hostalen QCP 5404 Ivory :
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Hostalen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 0.52 cm³/10min ISO 1133
Température 230 °C -
Charge 2.16 kg -
Indice de fluidité, MFI 0.3 g/10min ISO 1133
Température 190 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 830 MPa ISO 527
Résistance à la traction 23 MPa ISO 527
Déformation à la rupture 85 % ISO 527
Module de flexion, 23°C 870 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 15 kJ/m² ISO 179/1eA
Propriétés diversesValeurUnitéNorme du test
Masse volumique 956 kg/m³ ISO 1183
Bulk density 580 kg/m³ -
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Type of extrusion pipe/tube - -
Température de la matière fondue 180 - 210 °C -
Caractéristiques
Transformation
Extrusion de tubes, Extrusion de profilés, Extrusion de plaques
Conditionnement
Granulés
Résistance Chimique
Résistance à oxydation
Certifications
Résine de contenu recyclé
Applications
General Purpose
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.