Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kynar® UHM 6020-20 - PVDF-GF - ARKEMA

Material Data Center offers the following functions for Kynar® UHM 6020-20:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kynar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
Kynar® resins are fluorinated thermoplastic homopolymers.

Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, excellent mechanical and thermo-mechanical properties.

Kynar® UHM 6020-20 resin is a specific grade of granules for injection, extrusion, compression and transfer molding. 

This grade has specific improved mechanical properties where extreme conditions in temperature and pressure are needed.


Main applications:
  • corrosion protection in the chemical industry

Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 7900 MPa ISO 527
Contrainte à la rupture 120 MPa ISO 527
Déformation à la rupture 3 % ISO 527
Module de fluage en traction, 1h 7900 MPa ISO 899-1
Module de fluage en traction, 1000h 7900 MPa ISO 899-1
Résistance au choc Charpy, +23°C 44 kJ/m² ISO 179/1eU
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 170 °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 159 °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 35 E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 35 E-6/K ISO 11359-1/-2
Inflammabilité ep. nom. 1.5 mm V-0 class IEC 60695-11-10
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0 % Sim. to ISO 62
Absorption d'humidité 0 % Sim. to ISO 62
Caractéristiques
Transformation
Moulage par injection, Extrusion de profilés, Moulage par transfert
Conditionnement
Granulés
Caractéristiques
Homopolymère
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.