Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LIM® 8040 - VMQ - Momentive Performance Materials Inc.

Material Data Center offers the following functions for LIM® 8040:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other LIM datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
Appearance/Color:
liquid, translucent

Characteristics:
self-bonding

Conformity:
The product meets the requirements for passing the test standards USP Class VI.

These values were determined with the following conditions:
Postbaked 1 hr @ 177ºC / 350ºF.

Other values were achieved with the following conditions:
As Molded 30 sec @ 177ºC / 350ºF:


Property Value Unit Standard
Shore A hardness, 3s 43 - ISO 868
Tensile Strength 5.2 MPa
 ISO 37
Strain at break 385 %
 ISO 37
Tear Strength 37.8 kN/m
 ASTM D 624
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Résistance à la traction 5 MPa ISO 37
Déformation à la rupture 390 % ISO 37
Dureté Shore A 43 - ISO 7619-1
ASTM Data
Résistance au déchirement 37 kN/m ASTM D 624
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1080 kg/m³ ISO 1183
Caractéristiques
Transformation
Moulage par injection
Certifications
USP Class VI approbation
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.