Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LIGHTER™ C88 - PET - Equipolymers Global

Material Data Center offers the following functions for LIGHTER™ C88:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lighter datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Propriétés spécifiques à la matière - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2300 MPa ISO 527
Contrainte d'écoulement 55 MPa ISO 527
Déformation au seuil d'écoulement 4 % ISO 527
Contrainte à la rupture 24 MPa ISO 527
Déformation à la rupture 250 % ISO 527
Module de flexion, 23°C 2100 MPa ISO 178
Résistance au choc Izod avec entaille, +23°C 4.5 kJ/m² ISO 180/1A
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 247 °C ISO 11357-1/-3
Température de transition vitreuse, 10°C/min 78 °C ISO 11357-1/-2
Température de ramolliss. Vicat, B 77 °C ISO 306
Coeffic. de dilatation therm. linéique, parallèle 83 E-6/K ISO 11359-1/-2
Propriétés diversesValeurUnitéNorme du test
Viscosité intrinsèque 0.76 dl/g -
Acétaldéhyde 1 ppm -
Color b 1 - CIE
Crystallinity 50 % -
Moisture Content 0.4 % -
Bulk density 880 kg/m³ -
Propriétés spécifiques à la matièreValeurUnitéNorme du test
ISO Data
Indice de viscosité 88 cm³/g ISO 307, 1157, 1628
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Température de la matière fondue 277 °C -
Température du moule 20 °C -
Caractéristiques
Transformation
Moulage par injection, Extrusion de plaques, Soufflage, Thermoformage
Certifications
Contact alimentaire
Applications
Emballage
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.