Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUPOY PC 1621-02 - PC - LG Chem

Material Data Center offers the following functions for LUPOY PC 1621-02:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lupoy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés optiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 2.5 g/10min ASTM D 1238
Température 300 °C -
Charge 1.2 kg -
Retrait au moulage , parallèle 0.006 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2270 MPa ISO 527
Contrainte d'écoulement 63 MPa ISO 527
Déformation au seuil d'écoulement 6 % ISO 527
Contrainte à la rupture 60 MPa ISO 527
Déformation à la rupture 90 % ISO 527
Module de flexion, 23°C 2410 MPa ISO 178
Résistance à la flexion 96 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 45 kJ/m² ISO 179/1eA
Résistance au choc Izod, +23°C N kJ/m² ISO 180/1U
Résistance au choc Izod avec entaille, +23°C 927 kJ/m² ISO 180/1A
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 128 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 142[ann.] °C ISO 75-1/-2
Température de ramolliss. Vicat, B 146 °C ISO 306
ASTM Data
coefficient de dilatation thermique, long. 68 E-6/K ASTM D 696
ann.: annealed
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Haze 1.1 % ASTM D 1003
Lumière á Transmittance 89 % ASTM D 1003
Indice de réfraction 1.59 - ASTM D 542
Propriétés diversesValeurUnitéNorme du test
Absorption d’eau, 24hr 0.15 % ASTM D 570
Absorption d’eau, équilibre 0.32 % ASTM D 570
Densité 1200 kg/m³ ASTM D 792
Caractéristiques
Transformation
Soufflage
Additifs
Agent de démoulage
Propriétés spéciales
Modifié choc, Stabilisé à la chaleur, Transparent
Certifications
Contact alimentaire, FDA 21 CFR approbation
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.