Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUVOSINT X92A-1 - TPU - LEHVOSS Group

Material Data Center offers the following functions for LUVOSINT X92A-1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Luvosint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - 3D Data
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 18 cm³/10min ISO 1133
Température 190 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Dureté Shore A 88 - ISO 7619-1
Other Standards[S]
Module de flexion, 23°C 27 MPa ISO 6721-1
Module de flexion 72 MPa ISO 6721-1
Module de flexion - Température 60 °C -
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 160 °C ISO 11357-1/-3
Température de ramolliss. Vicat, A 90 °C ISO 306
Other Standards[S]
Température de transition vitreuse, 10°C/min -13.6 °C ISO 6721-1
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1200 kg/m³ ISO 1183
Bulk density 457 kg/m³ -
3D DataValeurUnitéNorme du test
Other Standards[S]
Résistance à la traction, flat 20[1] MPa DIN 53504
Résistance à la traction, upright 15[2] MPa DIN 53504
Déformation à la rupture, flat 520[1] % DIN 53504
Déformation à la rupture, upright 500[2] % DIN 53504
1: XY-direction  2: ZX-direction  S: These properties are reported by the producer according standards that are different to our defaults.
Caractéristiques
Transformation
Additive Manufacturing, Frittage laser
Conditionnement
Poudre, Couleurs naturelles
Applications
Sport
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.