Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makroblend® UT235 M RE - (PC+PET)-T15 - Covestro Deutschland AG

Material Data Center offers the following functions for Makroblend® UT235 M RE:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Préparation et conditionnement des éprouvettes - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
  • (PC+PET)-blend, 15% mineral filled, easy flow, low coefficient of linear thermal expansion, easy release, injection molding. Molded parts from UT235M having exceptional dimensional stability.
Partially bio-circular grade / Attributed via mass balance (according to ISCC PLUS Standard).
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 43 cm³/10min ISO 1133
Température 270 °C -
Charge 5 kg -
Retrait au moulage, parallèle 0.6 % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 0.6 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 4500 MPa ISO 527
Contrainte à la rupture 67 MPa ISO 527
Déformation à la rupture 4 % ISO 527
Module de flexion, 23°C 4650 MPa ISO 178
Résistance à la flexion 115 MPa ISO 178
Résistance au choc Charpy, +23°C 85 kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C 85 kJ/m² ISO 179/1eU
Résistance au choc Izod, +23°C 75 kJ/m² ISO 180/1U
Perforation - force maximum, +23°C 4500 N ISO 6603-2
Perforation - Energie, +23°C 36 J ISO 6603-2
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 114 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 128 °C ISO 75-1/-2
Température de ramolliss. Vicat, B 139 °C ISO 306
Coeffic. de dilatation therm. linéique, parallèle 45 E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 45 E-6/K ISO 11359-1/-2
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.4 % Sim. to ISO 62
Absorption d'humidité 0.2 % Sim. to ISO 62
Masse volumique 1340 kg/m³ ISO 1183
Bulk density 750 kg/m³ -
Préparation et conditionnement des éprouvettesValeurUnitéNorme du test
ISO Data
Injection, température de la matière fondue 270 °C ISO 294
Injection, température du moule 70 °C ISO 294
Injection, vitesse d'injection 200 mm/s ISO 294
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 110 °C -
Pré-séchage - temps 2 - 4 h -
L'humidité de traitement ≤0.01 % -
Température de la matière fondue 260 - 280 °C -
Température du moule 70 - 80 °C -
Zone 1 220 - 230 °C -
Zone 2 240 - 250 °C -
Zone 3 260 - 270 °C -
Température de la buse 270 - 280 °C -
Contre-pression 5 - 10 MPa -
Caractéristiques
Transformation
Moulage par injection
Additifs
Agent de démoulage
Certifications
Contient des ressources renouvelables, ISCC Plus
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.