Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MALECCA K-510 - ABS - Denka Company Limited

Material Data Center offers the following functions for MALECCA K-510:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Malecca datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 20 g/10min ISO 1133
Température 265 °C -
Charge 10 kg -
Retrait au moulage, parallèle 0.8 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2200 MPa ISO 527
Contrainte d'écoulement 41 MPa ISO 527
Contrainte à la rupture 38 MPa ISO 527
Module de flexion, 23°C 2100 MPa ISO 178
Résistance à la flexion 70 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 12 kJ/m² ISO 179/1eA
Dureté Rockwell R 112 - ISO 2039-2
ASTM Data
Module de flexion 2050 MPa ASTM D 790
Résistance à la flexion 71 MPa ASTM D 790
Dureté Rockwell R 114 - ASTM D 785
Izod choc avec entaille, 1/8 in 157 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 107 °C ISO 75-1/-2
Température de ramolliss. Vicat, B 131 °C ISO 306
Inflammabilité pr. épaisseur h HB class IEC 60695-11-10
Yellow Card disponible oui - -
ASTM Data
DTUL à 264 psi 118 °C ASTM D 648
Vicat température 129 °C ASTM D 1525
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1080 kg/m³ ISO 1183
Densité 1080 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 100 - 110 °C -
Pré-séchage - temps 3 - 4 h -
Température du moule 50 - 80 °C -
Zone 1 220 - 240 °C -
Zone 2 230 - 260 °C -
Zone 3 240 - 270 °C -
Température de la buse 240 - 265 °C -
Vitesse de rotation de vis 50 - 80 rpm -
Contre-pression 0.5 - 1 MPa -
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Stabilisé à la chaleur
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.