Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NIFORM 130 - POM - Soredi S.p.a.

Material Data Center offers the following functions for NIFORM 130:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Niform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 13 g/10min ASTM D 1238
Température 190 °C -
Charge 2.16 kg -
Retrait au moulage , parallèle 0.0265 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de traction d’élasticité 63 MPa ASTM D 638
Module de flexion 2600 MPa ASTM D 790
Résistance à la flexion 85 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 67.3 J/m ASTM D 256
Izod choc avec entaille, bas température 48 J/m ASTM D 256
Température -20 °C -
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Coeffic. de dilatation therm. linéique, perpend. 110 E-6/K ISO 11359-1/-2
ASTM Data
UL 94 inflammabilité HB - UL 94
Épaisseur testée 1.6 mm -
DTUL à 264 psi 115 °C ASTM D 648
Vicat température 150 °C ASTM D 1525
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Permittivité relative, 1MHz 3.7 - IEC 62631-2-1
Facteur de pertes, 1MHz 200 E-4 IEC 62631-2-1
Résistivité transversale 1E12 Ohm*m IEC 62631-3-1
Résistivité superficielle 1E15 Ohm IEC 62631-3-2
Rigidité diélectrique 19 kV/mm IEC 60243-1
Propriétés diversesValeurUnitéNorme du test
Absorption d'humidité 0.4 % Sim. to ISO 62
Densité 1410 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Caractéristiques
Copolymère
Applications
General Purpose
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.