Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Novodur® Ultra 4105 - (ABS+PC) - INEOS Styrolution

Check here, which other Novodur datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

Novodur® Ultra 4105 acrylonitrile butadiene styrene (ABS) polymer features high surface quality and good impact strength. Novodur® Ultra 4105 is a PC modified high heat injection molding grade with very high impact strength. Furthermore, it is of low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs.

Caractéristiques des transformations/physiques	Valeur	Unité	Norme du test
ISO Data
Indice de fluidité à chaud en volume, MVR	14	cm³/10min	ISO 1133
Température	260	°C	-
Charge	5	kg	-
Densité du fondu	972	kg/m³	-
Conductivité thermique du fondu	0.232	W/(m K)	-
Chaleur spécifique du fondu	2330	J/(kg K)	-
Température d'éjection	94	°C	-

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Module en traction	2000	MPa	ISO 527
Contrainte d'écoulement	45	MPa	ISO 527
Déformation au seuil d'écoulement	3.7	%	ISO 527
Résistance au choc Charpy, +23°C	N	kJ/m²	ISO 179/1eU
Résistance au choc Charpy, -30°C	N	kJ/m²	ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C	40	kJ/m²	ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C	32	kJ/m²	ISO 179/1eA

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa	99	°C	ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa	108	°C	ISO 75-1/-2
Température de ramolliss. Vicat, B	107	°C	ISO 306
Coeffic. de dilatation therm. linéique, parallèle	90	E-6/K	ISO 11359-1/-2

Propriétés électriques	Valeur	Unité	Norme du test
ISO Data
Rigidité diélectrique	37	kV/mm	IEC 60243-1
Indice de résistance au cheminement	600	-	IEC 60112

Propriétés diverses	Valeur	Unité	Norme du test
Masse volumique	1070	kg/m³	ISO 1183

Fonctions

Caractéristiques

Transformation

Moulage par injection

Conditionnement

Granulés

Caractéristiques

Low Emission

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Moulages par injection

PREPROCESSING

Pre-drying, Temperature: 80°C

Pre-drying, Time: 2 - 4h

PROCESSING

Melt temperature, range: 230 - 260°C

Mold temperature, range: 60 - 80°C

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.