Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NYLENE BS-640-A - PA6 - Polymeric Resources Corporation

Material Data Center offers the following functions for NYLENE BS-640-A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Nylene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Informations produit
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de traction 78.6 MPa ASTM D 638
Allongement à la rupture 150 % ASTM D 638
Module de flexion 2544 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 46.2 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
DTUL à 264 psi 56 °C ASTM D 648
Propriétés diversesValeurUnitéNorme du test
Moisture Content 0.12 % -
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Pré-séchage - température 82 °C -
Pré-séchage - temps 2 - 4 h -
Température de la matière fondue 249 - 260 °C -
Température - Zone d'alimentation 232 - 243 °C -
Zone 1 243 - 254 °C -
Zone 2 249 - 260 °C -
Température de la buse 249 - 260 °C -
Caractéristiques
Transformation
Extrusion (autres)
Applications
General Purpose
Disponibilité régionale
Amérique du nord
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.