Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of P84®NT2 HCM - PI - Evonik Operations GmbH

Material Data Center offers the following functions for P84®NT2 HCM:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other P84 datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit

Neat aromatic Polyimide

Polyimid P84® NT - at a glance

 

  • Excellent performance at high temperatures
  • High strength and excellent shape stability
  • Very good impact resistance
  • High heat deflection temperature
  • Very good creep resistance even at elevated temperatures
  • Machinable with standard tools
  • Low wear and friction behaviour
  • Processing by Hot compression molding

 

 

Application examples

bushings, seals, bearings components, guides, gear wheels, and valve parts

in the automotive and aerospace industries and in industrial equipment.

For further information please visit WWW.P84.COM.

Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 3428 MPa ISO 527
Contrainte à la rupture 132 MPa ISO 527
Déformation à la rupture 6.3 % ISO 527
Résistance au choc Charpy, +23°C 133 kJ/m² ISO 179/1eU
Type de défaillance C - -
Résistance au choc Charpy (entaillé), +23°C 7.5 kJ/m² ISO 179/1eA
Type de défaillance C - -
Dureté Shore D 88 - ISO 7619-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de transition vitreuse, 10°C/min 364 °C ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa 340 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 377 °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 36 E-6/K ISO 11359-1/-2
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Résistivité transversale >1E13 Ohm*m IEC 62631-3-1
Résistivité superficielle >1E15 Ohm IEC 62631-3-2
Rigidité diélectrique 37 kV/mm IEC 60243-1
Indice de résistance au cheminement 125 - IEC 60112
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1380 kg/m³ ISO 1183
Caractéristiques
Transformation
Moulage par compression
Conditionnement
Granulés, Grains, Poudre
Propriétés spéciales
Modifié choc, Stabilisé à la chaleur
Caractéristiques
Résistance au fluage, Grade tribologique
Applications
Avions et aéronautique, Automobile
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.