Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 3533 SP 01 - TPA - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

Polyether block amide Pebax® 3533 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.


Main applications:

• Flexible injected parts
• High performance power trasmission belts
• Silent gears
• Toy component

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Propriétés mécaniques	sec / cond	Unité	Norme du test
ISO Data
Module en traction	19 / 18	MPa	ISO 527
Contrainte pr. une déform. de 50%	4 / 4	MPa	ISO 527
Déformation à la rupture	>50 / >50	%	ISO 527
Contrainte à 10% de déformation	2 / *	MPa	ISO 527
Contrainte à 100% de déformation	6 / *	MPa	ISO 527
Contrainte à la rupture TPE	39 / *	MPa	ISO 527
Déformation à la rupture TPE	>300 / *	%	ISO 527
Déformation rémanente en compression à 23 °C, 24h	22 / *	%	ISO 815
Résistance à la déchirure	50 / *	kN/m	ISO 34-1
Résistance à l'abrasion	64 / *	mm³	ISO 4649
Dureté Shore A	80 / *	-	ISO 7619-1
Dureté Shore D	25 / *	-	ISO 7619-1

Propriétés thermiques	sec / cond	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	144 / *	°C	ISO 11357-1/-3
Température de transition vitreuse, 10°C/min	-65 / *	°C	ISO 11357-1/-2
Température de fléchissement s/chrg, 0.45 MPa	46 / *	°C	ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle	210 / *	E-6/K	ISO 11359-1/-2

Propriétés électriques	sec / cond	Unité	Norme du test
ISO Data
Permittivité relative, 100Hz	6 / -	-	IEC 62631-2-1
Permittivité relative, 1MHz	6 / -	-	IEC 62631-2-1
Facteur de pertes, 100Hz	310 / -	E-4	IEC 62631-2-1
Facteur de pertes, 1MHz	434 / -	E-4	IEC 62631-2-1
Résistivité transversale	3.2E10 / -	Ohm*m	IEC 62631-3-1
Résistivité superficielle	* / 3E12	Ohm	IEC 62631-3-2
Rigidité diélectrique	33.5 / -	kV/mm	IEC 60243-1
Indice de résistance au cheminement	* / 600	-	IEC 60112

Propriétés diverses	sec / cond	Unité	Norme du test
Absorption d'eau	1.2 / *	%	Sim. to ISO 62
Absorption d'humidité	0.4 / *	%	Sim. to ISO 62
Masse volumique	1000 / 1000	kg/m³	ISO 1183

Fonctions

Caractéristiques

Transformation

Moulage par injection, Extrusion de films, Extrusion de profilés, Extrusion (autres), Moulage par transfert, Coulage, Thermoformage

Conditionnement

Granulés

Additifs

Lubrifiant, Agent antiadhérent

Propriétés spéciales

Galvanisable, Stabilisé à la lumière, Stabilisé aux intempéries, Stabilisé à la chaleur

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Moulages par injection

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 180°C / 210°C / 240°C.
- Typical mold temperature : 10 – 30°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 55-65°C

Extrusion (autres)

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 190°C / 205°C / 220°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 55-65°C.

Résistance Chimique

Acides
	Acide sulfurique (masse en 38%) (23°C)
Bases
	Hydroxyde de soude (masse en 1%) (23°C)
Alcool
	Ethanol (23°C)
Hydrocarbures
	iso-Octane (23°C)
Cetones
	Acetone (23°C)
Selts
	Chlorure de zinc (masse en 50%) (23°C)
Autres
	L'eau (23°C)

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.