Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 5533 SN 70 BLACK - TPA-CD... - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

Pebax® 5533 SN 70 BLACK resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SN 70 grade is made conductive thanks to carbon black.


Main applications:

• Conductive injected parts
• Hose for fuel transportation

Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Caractéristiques des transformations/physiques	sec / cond	Unité	Norme du test
ISO Data
Indice de fluidité à chaud en volume, MVR	5 / *	cm³/10min	ISO 1133
Température	250 / *	°C	-
Charge	5 / *	kg	-

Propriétés mécaniques	sec / cond	Unité	Norme du test
ISO Data
Module en traction	305 / 298	MPa	ISO 527
Contrainte d'écoulement	18 / 17	MPa	ISO 527
Déformation au seuil d'écoulement	31 / 36	%	ISO 527
Déformation nominale à la rupture	>50 / >50	%	ISO 527
Résistance au choc Charpy (entaillé), -30°C	- / 18	kJ/m²	ISO 179/1eA
Dureté Shore D	60 / *	-	ISO 7619-1

Propriétés thermiques	sec / cond	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	159 / *	°C	ISO 11357-1/-3
Coeffic. de dilatation therm. linéique, parallèle	220 / *	E-6/K	ISO 11359-1/-2
Inflammabilité ep. nom. 1.5 mm	HB / *	class	IEC 60695-11-10
Epaisseur de l'éprouvette	1.6 / *	mm	-
Inflammabilité pr. épaisseur h	HB / *	class	IEC 60695-11-10
Epaisseur de l'éprouvette	3.2 / *	mm	-

Propriétés électriques	sec / cond	Unité	Norme du test
ISO Data
Résistivité transversale	110000 / -	Ohm*m	IEC 62631-3-1
Résistivité superficielle	* / 5500	Ohm	IEC 62631-3-2

Propriétés diverses	sec / cond	Unité	Norme du test
Absorption d'eau	1.2 / *	%	Sim. to ISO 62
Absorption d'humidité	0.5 / *	%	Sim. to ISO 62
Masse volumique	1090 / 1090	kg/m³	ISO 1183

Fonctions

Caractéristiques

Transformation

Moulage par injection, Extrusion de films, Extrusion de profilés, Extrusion (autres), Moulage par transfert, Coulage, Thermoformage

Conditionnement

Granulés, Noir

Propriétés spéciales

Conductivité électrique accrue, Antistatique, Galvanisable, Stabilisé à la lumière, Stabilisé aux intempéries, Stabilisé à la chaleur

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Moulages par injection

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 200°C / 240°C / 270°C.
- Typical mold temperature : 25 – 60°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.

Extrusion (autres)

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 210°C / 220°C / 230°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.

Résistance Chimique

Acides
	Acide sulfurique (masse en 38%) (23°C)
Bases
	Hydroxyde de soude (masse en 1%) (23°C)
Alcool
	Ethanol (23°C)
Hydrocarbures
	iso-Octane (23°C)
Cetones
	Acetone (23°C)
Selts
	Chlorure de zinc (masse en 50%) (23°C)
Autres
	L'eau (23°C)

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.