Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Platamid® HX 2507F Pellets - PA* - ARKEMA
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Platamid datasheets, application examples or technical articles are available in Material Data Center
Alcohol Soluble Copolyamides
Platamid® HX 2507F Alcohol Soluble Copolyamides comprises copolyamides of different structures, molecular weights and melting characteristics which are particularly well suited for coating solutions. The products offer good film forming properties, excellent abrasion resistance and good adhesion to both metallic and non-metallic surfaces.
- Methanol
- Ethanol
- Propanol / Isopropanol
- Butanol / Isobutanol
- or mixtures of these
- Benzyl alcohol
- cyclohexanol
AVAILABLE GRADES
This grade is available:
Non-dried pellets („F“) with a maximum residual moisture content of ≤ 1.8 %
PACKAGINGIn 25 kg paper bags with aluminium foil / polyethylene liners on 1000 kg pallets
SHELF LIFETwo years from the date of delivery. For any use above this limit, please refer to our technical services.
Caractéristiques des transformations/physiques | sec / cond | Unité | Norme du test | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Indice de fluidité à chaud en volume, MVR | 0.6 / * | cm³/10min | ISO 1133 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Température | 190 / * | °C | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Charge | 2.16 / * | kg | - |
Propriétés thermiques | sec / cond | Unité | Norme du test | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Température de fusion, 10°C/min | 155 / * | °C | ISO 11357-1/-3 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Température de transition vitreuse, 10°C/min | 115 / * | °C | ISO 11357-1/-2 |
Propriétés diverses | sec / cond | Unité | Norme du test |
Absorption d'eau | 4.5 / * | % | Sim. to ISO 62 |
Masse volumique | 992 / 992 | kg/m³ | ISO 1183 |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.