Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Premium PLA - PLA - Formfutura BV

Material Data Center offers the following functions for Premium PLA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Premium datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés optiques - Propriétés diverses - Propriétés mécaniques (Grades film)
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
Other Standards[S]
Indice de fluidité, MFI 6 g/10min
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés mécaniquesValeurUnitéNorme du test
Other Standards[S]
Module de flexion 2364 MPa
Résistance à la flexion 54.4 MPa
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
Température de fusion 210 °C ASTM D 3418
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Brillant 80[1] - ASTM D 2457
Haze 2.1 % ASTM D 1003
1: 20°
Propriétés diversesValeurUnitéNorme du test
Densité 1240 kg/m³ ASTM D 792
Propriétés mécaniques (Grades film)ValeurUnitéNorme du test
ASTM Data
Module en traction, long. 3140 MPa ASTM D 882
Module de traction, long. 105 MPa ASTM D 882
Allongement à la rupture, long. 175 % ASTM D 882
Caractéristiques
Transformation
Additive Manufacturing
Conditionnement
Monofilament
Caractéristiques
Stabilité thermique
Certifications
Contient des ressources renouvelables
Applications
General Purpose
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.