Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Reny 2502A - PAMXD6-(GF+MX)20 - Mitsubishi Engineering-Plastics Corporation

Material Data Center offers the following functions for Reny 2502A:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Reny datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 14 / * cm³/10min ISO 1133
Température 275 / * °C -
Charge 2.16 / * kg -
Indice de fluidité, MFI 21.6 g/10min ISO 1133
Température 275 °C -
Charge 2.16 kg -
Retrait au moulage, parallèle 0.5 / * % ISO 294-4, 2577
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 18400 / 14900 MPa ISO 527
Contrainte à la rupture 150 / 120 MPa ISO 527
Déformation à la rupture 1.2 / 1.3 % ISO 527
Module de flexion, 23°C 16500 / 14700 MPa ISO 178
Résistance au choc Charpy, +23°C 27 / 29 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 4.1 / 4.3 kJ/m² ISO 179/1eA
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 217 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 235 / * °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 20 / * E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 30 / * E-6/K ISO 11359-1/-2
Inflammabilité ep. nom. 1.5 mm V-0 / * class IEC 60695-11-10
Epaisseur de l'éprouvette 1.6 / * mm -
Yellow Card disponible oui / * - -
Propriétés électriquessec / condUnitéNorme du test
ISO Data
Permittivité relative, 100Hz - / 5 - IEC 62631-2-1
Permittivité relative, 1MHz - / 5 - IEC 62631-2-1
Facteur de pertes, 100Hz - / 500 E-4 IEC 62631-2-1
Facteur de pertes, 1MHz - / 170 E-4 IEC 62631-2-1
Résistivité transversale 2E14 / 1E13 Ohm*m IEC 62631-3-1
Résistivité superficielle * / 2E14 Ohm IEC 62631-3-2
Rigidité diélectrique 27 / 26 kV/mm IEC 60243-1
Indice de résistance au cheminement 200 / 300 - IEC 60112
Propriétés diversessec / condUnitéNorme du test
Absorption d'humidité 0.9 / * % Sim. to ISO 62
Masse volumique 1660 / - kg/m³ ISO 1183
Caractéristiques
Propriétés spéciales
Ignifugé
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.