Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® MB 3610 NAT - PA11-I - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

PA11-P, EHL, 22-002
Rilsan® MB 3610 NAT resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and specially designed for pneumatic applications. It combines very high flexibility with good impact resistance.



Main applications:

• Pneumatic tubing

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Caractéristiques des transformations/physiques	sec / cond	Unité	Norme du test
ISO Data
Indice de fluidité à chaud en volume, MVR	4 / *	cm³/10min	ISO 1133
Température	235 / *	°C	-
Charge	5 / *	kg	-

Propriétés mécaniques	sec / cond	Unité	Norme du test
ISO Data
Module en traction	- / 210	MPa	ISO 527
Résistance au choc Charpy (entaillé), -30°C	- / 10	kJ/m²	ISO 179/1eA
Dureté Shore D	53 / *	-	ISO 7619-1

Propriétés thermiques	sec / cond	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	188 / *	°C	ISO 11357-1/-3

Propriétés électriques	sec / cond	Unité	Norme du test
ISO Data
Résistivité transversale	1.9E11 / -	Ohm*m	IEC 62631-3-1

Propriétés diverses	sec / cond	Unité	Norme du test
Absorption d'eau	1.1 / *	%	Sim. to ISO 62
Absorption d'humidité	0.45 / *	%	Sim. to ISO 62
Masse volumique	1030 / 1030	kg/m³	ISO 1183
Biobased content	59	%	-

Fonctions

Caractéristiques

Transformation

Extrusion de profilés

Conditionnement

Granulés, Couleurs naturelles

Additifs

Plastifiant

Propriétés spéciales

Modifié choc, Stabilisé à la lumière, Stabilisé aux intempéries, Stabilisé à la chaleur

Certifications

Contient des ressources renouvelables

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Extrusion (autres)

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 230°C / 250°C / 280°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 80-90°C.

Résistance Chimique

Acides
	Acide acétique (masse en 5%) (23°C)
	Acide citrique (masse en 10%) (23°C)
	Acide lactique (masse en 10%) (23°C)
	Acide chlorhydrique (masse en 36%) (23°C)
	Acide nitrique (masse en 40%) (23°C)
	Acide sulfurique (masse en 38%) (23°C)
	Acide sulfurique (masse en 5%) (23°C)
	Acide chromique (masse en 40%) (23°C)
Bases
	Hydroxyde de soude (masse en 35%) (23°C)
	Hydroxyde de soude (masse en 1%) (23°C)
	Hydroxyde d'ammoniaque (masse en 10%) (23°C)
Alcool
	Méthanol (23°C)
	Ethanol (23°C)
Hydrocarbures
	n-Hexane (23°C)
	Toluene (23°C)
Cetones
	Acetone (23°C)
Huiles minérales
	Huile moteur multigrade SAE 10W40 (23°C)
	Huile moteur multigrade SAE 10W40 (130°C)
	Huile engrenage hypoide SAE 80/90 (130°C)
	Huile d'isolation (23°C)
Carburants standards
	ISO 1817 Liquide 1 (60°C)
	ISO 1817 Liquide 2 (60°C)
	ISO 1817 Liquide 3 (60°C)
	ISO 1817 Liquide 4 (60°C)
	Carburant stand. sans alcool (de pref. ISO 1817 liquide C) (23°C)
	Carburant stand. avec alcool (de pref. ISO 1817 Liquid 4) (23°C)
	Gasoil (pref. ISO 1817 liquide F) (23°C)
	Gasoil (pref. ISO 1817 liquide F) (90°C)
	Gasoil (pref. ISO 1817 liquide F) (>90°C)
Selts
	Chlorure de sodium (masse en 10%) (23°C)
	Hypochlorite de soude (masse en 10%) (23°C)
	Chlorure de zinc (masse en 50%) (23°C)
Autres
	Acétate d'éthyle (23°C)
	Peroxyde d'hydrogene (23°C)
	Liquide de frein DOT N° 4 (130°C)
	Ethylene glycol (108°C)

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.