Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® HT CZM 30 BLACK TLD - PA*-GF30 - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

PA11/10T,GF30,MHL,C16-090  

Rilsan® HT CZM 30 BLACK TLD is a polyphthalamide produced from a renewable source. This grade is glass fiber-reinforced, formulated and designed for injection molding for high-temperature applications.

According to ASTM D6866, the biobased carbon content is measured at 68%.

Main applications:

• Automotive & transportation quick connector for flexible fuels and powertrain applications
• High-temperature injection molding

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Caractéristiques des transformations/physiques	sec / cond	Unité	Norme du test
ISO Data
Indice de fluidité à chaud en volume, MVR	15 / *	cm³/10min	ISO 1133
Température	300 / *	°C	-
Charge	2.16 / *	kg	-
Retrait au moulage, parallèle	0.3 / *	%	ISO 294-4, 2577
Retrait au moulage, perpendiculaire	1.0 / *	%	ISO 294-4, 2577

Propriétés mécaniques	sec / cond	Unité	Norme du test
ISO Data
Module en traction	8700 / -	MPa	ISO 527
Contrainte à la rupture	151 / -	MPa	ISO 527
Déformation à la rupture	2.6 / -	%	ISO 527
Résistance au choc Charpy, +23°C	57 / -	kJ/m²	ISO 179/1eU
Résistance au choc Charpy, -30°C	54 / -	kJ/m²	ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C	9.1 / -	kJ/m²	ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C	7.4 / -	kJ/m²	ISO 179/1eA

Propriétés thermiques	sec / cond	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	255 / *	°C	ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa	220 / *	°C	ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa	240 / *	°C	ISO 75-1/-2

Propriétés diverses	sec / cond	Unité	Norme du test
Absorption d'eau	1.13 / *	%	Sim. to ISO 62
Absorption d'humidité	0.22 / *	%	Sim. to ISO 62
Masse volumique	1300 / 1300	kg/m³	ISO 1183
Biobased content	67	%	-

Fonctions

Caractéristiques

Transformation

Moulage par injection

Conditionnement

Granulés, Noir

Additifs

Agent de démoulage

Propriétés spéciales

Stabilisé à la lumière, Stabilisé aux intempéries, Stabilisé à la chaleur

Certifications

Contient des ressources renouvelables

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Moulages par injection

Injection molding process conditions :
- Typical melt temperature (Min / Recommanded / Maxi) : 270°C  / 280°C / 320°C.
- Typical mold temperature : 90 - 110°C.
- Drying time and temperature (only for bags opened for more than two hours) : 4 - 8 hours / 100 - 110°C.

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.