Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® HT CESV BLACK P010 TL - PA*-I - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

PA11/10T-I,,EHL,C16-010

Rilsan® HT CESV BLACK P010 TL  is a flexible polyphthalamide produced from a renewable source, typical used to replace metal in tubing for high-temperature automotive, transportation and other demanding technical  applications.

According to ASTM D6866, the biobased carbon content is measured at 48%.

Main applications:

• Thermoplastic lines for automotive & transportation applications such as high temperature air/vacuum
• aggressive media and oil management systems
• cooling and selective catalyst reduction lines etc
• Hydraulic and pneumatic lines

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Caractéristiques des transformations/physiques	sec / cond	Unité	Norme du test
ISO Data
Indice de fluidité à chaud en volume, MVR	1.9 / *	cm³/10min	ISO 1133
Température	300 / *	°C	-
Charge	5 / *	kg	-

Propriétés mécaniques	sec / cond	Unité	Norme du test
ISO Data
Module en traction	- / 1015	MPa	ISO 527
Contrainte d'écoulement	- / 30	MPa	ISO 527
Déformation au seuil d'écoulement	- / 5	%	ISO 527
Déformation nominale à la rupture	- / >50	%	ISO 527
Résistance au choc Charpy (entaillé), +23°C	- / 84	kJ/m²	ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C	- / 16	kJ/m²	ISO 179/1eA
Dureté Shore D	66 / *	-	ISO 7619-1

Propriétés thermiques	sec / cond	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	260 / *	°C	ISO 11357-1/-3
Température de transition vitreuse, 10°C/min	82 / *	°C	ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa	66 / *	°C	ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa	82 / *	°C	ISO 75-1/-2

Propriétés diverses	sec / cond	Unité	Norme du test
Masse volumique	1050 / -	kg/m³	ISO 1183
Biobased content	45	%	-

Fonctions

Caractéristiques

Transformation

Extrusion de profilés, Extrusion (autres)

Conditionnement

Granulés, Noir

Propriétés spéciales

Modifié choc, Stabilisé à la lumière, Stabilisé aux intempéries, Stabilisé à la chaleur

Certifications

Contient des ressources renouvelables

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Extrusion de profilés

Processing conditions :
- Typical  melt temperature (Min / Recommended / Max) : 270°C / 280°C / 290°C.
- Drying time and temperature (only for bags opened for more than two hours) :  8 - 12 hours  at 70 °C.

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.