Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styroflex® ECO 2G66 BC100 - SB - INEOS Styrolution

Material Data Center offers the following functions for Styroflex® ECO 2G66 BC100:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styroflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés optiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 126 % (ISO 14044)
Attributed Content of ISCC-certified Bio-Circular Sources: 100 %
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 13 cm³/10min ISO 1133
Température 200 °C -
Charge 5 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 70 MPa ISO 527
Contrainte d'écoulement 3 MPa ISO 527
Déformation au seuil d'écoulement 50 % ISO 527
Déformation nominale à la rupture 500 % ISO 527
Contrainte à la rupture 9 MPa ISO 527
Déformation à la rupture 450 % ISO 527
Module de flexion, 23°C 60 MPa ISO 178
Résistance à la flexion 2 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C N kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 2 kJ/m² ISO 179/1eA
Dureté Shore A 86 - ISO 7619-1
Dureté Shore D 30 - ISO 7619-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de ramolliss. Vicat, A 39 °C ISO 306
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Haze 10 % ASTM D 1003
Lumière á Transmittance 80 % ASTM D 1003
Other Standards[S]
Indice de réfraction 1.57 - ISO 489
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.07 % Sim. to ISO 62
Masse volumique 998 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Température de la matière fondue 170 - 240 °C -
Température du moule 30 - 50 °C -
Caractéristiques
Transformation
Moulage par injection, Extrusion a film soufflé, Extrusion de films
Conditionnement
Granulés
Propriétés spéciales
Modifié choc, Transparent, Stérilisable, Stérilisation par oxyde d'éthylène (EtO), Stérilisation par rayonnement gamma
Résistance Chimique
Résistance au rayonnement
Certifications
Contient des ressources renouvelables, Contact alimentaire, ISCC Plus
Applications
Médical, Emballage
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.