Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of STYRON X-TECH™ 2175 - (PS-HI) - Trinseo

Material Data Center offers the following functions for STYRON X-TECH™ 2175:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 2.6 g/10min ISO 1133
Température 200 °C -
Charge 5 kg -
ASTM Data
Indice de fluidité, MFI 2.6 g/10min ASTM D 1238
Température 200 °C -
Charge 5 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 1700 MPa ISO 527
Contrainte d'écoulement 16 MPa ISO 527
Contrainte à la rupture 26 MPa ISO 527
Déformation à la rupture 63 % ISO 527
Module de flexion, 23°C 1800 MPa ISO 178
Résistance à la flexion 37 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 9.1 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 6.6 kJ/m² ISO 179/1eA
ASTM Data
Module en traction 1700 MPa ASTM D 638
Module de traction d’élasticité 16 MPa ASTM D 638
Résistance de traction à la rupture 26 MPa ASTM D 638
Allongement à la rupture 63 % ASTM D 638
Module de flexion 1800 MPa ASTM D 790
Résistance à la flexion 37 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 82 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 69 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 82 °C ISO 75-1/-2
Température de ramolliss. Vicat, A 99 °C ISO 306
Inflammabilité ep. nom. 1.5 mm HB class IEC 60695-11-10
Epaisseur de l'éprouvette 1.5 mm -
ASTM Data
DTUL à 66 psi 82 °C ASTM D 648
DTUL à 264 psi 69 °C ASTM D 648
Vicat température 99 °C ASTM D 1525
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1050 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
Densité 1050 kg/m³ ASTM D 792
Caractéristiques
Transformation
Extrusion de plaques, Extrusion (autres), Thermoformage
Propriétés spéciales
Modifié choc
Caractéristiques
Tenue de la matière à l’état fondu
Résistance Chimique
Fissuration à l’environnement
Certifications
Contact alimentaire, Approuvé pour le contact alimentaire suivant 10/2011, FDA 21 CFR approbation
Applications
Réfrigération
Disponibilité régionale
Europe, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.