Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Topester™ 455RM - TPC - Top Polymer Enterprise

Material Data Center offers the following functions for Topester™ 455RM:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Topester datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Recommandations pour la transformation Moulage par injection - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Informations produit
For more detailed information, please read our
or contact our representatives in your region.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 10 g/10min ISO 1133
Température 230 °C -
Charge 2.16 kg -
Retrait au moulage, parallèle 1.5 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Contrainte à la rupture 37 MPa ISO 527
Déformation à la rupture 590 % ISO 527
Module de flexion 220 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C N kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C N kJ/m² ISO 179/1eA
Dureté Shore D 55 - ISO 7619-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 204 °C ISO 11357-1/-3
Température de ramolliss. Vicat, A 180 °C ISO 306
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Résistivité transversale 4E11 Ohm*m IEC 62631-3-1
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1190 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 110 °C -
Pré-séchage - temps 3 - 5 h -
Température du moule 20 - 60 °C -
Zone 1 180 - 200 °C -
Zone 2 210 - 240 °C -
Zone 3 210 - 240 °C -
Température de la buse 210 - 240 °C -
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Type of extrusion wire/cable - -
Pré-séchage - température 110 °C -
Pré-séchage - temps 3 - 5 h -
Zone 1 180 - 200 °C -
Zone 2 210 - 240 °C -
Zone 3 210 - 240 °C -
Caractéristiques
Transformation
Moulage par injection, Extrusion (autres)
Conditionnement
Granulés, Couleurs naturelles
Propriétés spéciales
Stabilisé à la chaleur
Applications
Automobile
Disponibilité régionale
Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.