Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Topolymer® 9510-601N - TPV - Top Polymer Enterprise

Material Data Center offers the following functions for Topolymer® 9510-601N:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Topolymer datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés diverses - Recommandations pour la transformation Moulage par injection - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Informations produit
For more detailed information, please read our
or contact our representatives in your region.
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module à 100% allongement 2.7 MPa ASTM D 412
Dureté A Shore 60 - ASTM D 2240
Compression rémanente, 22 hr @ 158 °F 34 % ASTM D 395
Résistance de traction à la rupture 4.9 MPa ASTM D 412
Allongement à la rupture 410 % ASTM D 412
Propriétés diversesValeurUnitéNorme du test
Densité 950 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 80 °C -
Pré-séchage - temps 3 h -
Température du moule 25 - 55 °C -
Zone 1 175 - 190 °C -
Zone 2 180 - 195 °C -
Zone 3 185 - 200 °C -
Température de la buse 185 - 210 °C -
Vitesse de rotation de vis 100 - 200 rpm -
Contre-pression 0.35 - 0.7 MPa -
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Pré-séchage - température 80 °C -
Pré-séchage - temps 3 h -
Température de la matière fondue 175 - 215 °C -
Caractéristiques
Transformation
Moulage par injection, Extrusion (autres), Soufflage
Conditionnement
Granulés, Couleurs naturelles
Propriétés spéciales
Stabilisé aux intempéries, Stabilisé à la chaleur
Applications
Automobile, Électrotechnique et électrique
Disponibilité régionale
Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.