Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ubesta 3030 JLX2 - PA12 - UBE

Material Data Center offers the following functions for Ubesta 3030 JLX2:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ubesta datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 4 g/10min ISO 1133
Température 235 °C -
Charge 2.16 kg -
Retrait au moulage, parallèle 0.8 % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 1.4 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Contrainte d'écoulement 35 MPa ISO 527
Déformation au seuil d'écoulement 17 % ISO 527
Déformation à la rupture >50 % ISO 527
Module de flexion, 23°C 600 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 40 kJ/m² ISO 179/1eA
Dureté Shore D 74 - ISO 7619-1
Dureté Rockwell R 76 - ISO 2039-2
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 176 °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 55 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 98 °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 160 E-6/K ISO 11359-1/-2
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Résistivité transversale 1E11 Ohm*m IEC 62631-3-1
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1020 kg/m³ ISO 1183
Caractéristiques
Transformation
Extrusion (autres)
Conditionnement
Noir
Additifs
Plastifiant
Propriétés spéciales
Stabilisé aux intempéries
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.