Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrafuse PA - PA666 - BASF

Material Data Center offers the following functions for Ultrafuse PA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrafuse datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés thermiques - Propriétés diverses - 3D Data
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 49.5 / * cm³/10min ISO 1133
Température 275 / * °C -
Charge 5 / * kg -
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 196 / * °C ISO 11357-1/-3
Température de transition vitreuse, 10°C/min 49 / * °C ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa 65 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 135 / * °C ISO 75-1/-2
Température de ramolliss. Vicat, B 172 / * °C ISO 306
Propriétés diversessec / condUnitéNorme du test
Masse volumique 1110 / 1050 kg/m³ ISO 1183
3D Datasec / condUnitéNorme du test
Other Standards[S]
Module en traction, flat 2420 / 395 MPa ISO 527
Module en traction, upright 2120 / 334 MPa ISO 527
Résistance à la traction, flat 61.4 / 33.2 MPa ISO 527
Résistance à la traction, upright 16.4 / 17.6 MPa ISO 527
Déformation à la rupture, flat 9.6 / 143 % ISO 527
Déformation à la rupture, upright 0.8 / 12.8 % ISO 527
Module de flexion, flat 2050 / 445 MPa ISO 178
Module de flexion, on-edge 2250 / 468 MPa ISO 178
Module de flexion, upright 2150 / 428 MPa ISO 178
Résistance à la flexion, flat 77 / 17.7 MPa ISO 178
Résistance à la flexion, on-edge 95.5 / 18.1 MPa ISO 178
Résistance à la flexion, upright 40.2 / 17.3 MPa ISO 178
Résistance au choc Charpy, +23°C, flat 23 / 0 kJ/m² ISO 179/1eU
Résistance au choc Charpy, +23°C, on-edge 29.7 / 0 kJ/m² ISO 179/1eU
Résistance au choc Charpy, +23°C, upright 3.5 / 13.4 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C, flat 5.6 / - kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), +23°C, on-edge 3.3 / 136 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), +23°C, upright 1.2 / 9.4 kJ/m² ISO 179/1eA
Résistance au choc Izod, +23°C, flat 28 / 0 kJ/m² ISO 180/1U
Résistance au choc Izod, +23°C, on-edge 45.6 / 0 kJ/m² ISO 180/1U
Résistance au choc Izod, +23°C, upright 3.2 / 17.4 kJ/m² ISO 180/1U
Résistance au choc Izod avec entaille, +23°C, flat 5.8 / 85.4 kJ/m² ISO 180/1A
Résistance au choc Izod avec entaille, +23°C, on-edge 3.9 / 106 kJ/m² ISO 180/1A
Résistance au choc Izod avec entaille, +23°C, upright 1.7 / 10.1 kJ/m² ISO 180/1A
S: These properties are reported by the producer according standards that are different to our defaults.
Caractéristiques
Transformation
Additive Manufacturing
Conditionnement
Monofilament
Caractéristiques
Stabilité thermique
Disponibilité régionale
Amérique du nord, Europe, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.