Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrason® E 2010 G4 MR SW 15102 - PESU-GF20 - BASF

Material Data Center offers the following functions for Ultrason® E 2010 G4 MR SW 15102:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultrason E datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Propriétés spécifiques à la matière
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 29 cm³/10min ISO 1133
Température 360 °C -
Charge 10 kg -
Retrait au moulage, parallèle 0.4 % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 0.6 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 7300 MPa ISO 527
Contrainte à la rupture 125 MPa ISO 527
Déformation à la rupture 2.5 % ISO 527
Résistance au choc Charpy, +23°C 47 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 6.5 kJ/m² ISO 179/1eA
Ball indentation hardness 205 MPa ISO 2039-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de transition vitreuse, 10°C/min 225 °C ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa 220 °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 20 E-6/K ISO 11359-1/-2
Inflammabilité ep. nom. 1.5 mm V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 1.6 mm -
Inflammabilité pr. épaisseur h V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 3.0 mm -
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 1.6 % Sim. to ISO 62
Absorption d'humidité 0.6 % Sim. to ISO 62
Masse volumique 1500 kg/m³ ISO 1183
Propriétés spécifiques à la matièreValeurUnitéNorme du test
ISO Data
Indice de viscosité 56 cm³/g ISO 307, 1157, 1628
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés, Noir
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.