Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Versollan™ OM 1262NX-1 - TPU - Avient Corporation

Material Data Center offers the following functions for Versollan™ OM 1262NX-1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Versollan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 64 g/10min ASTM D 1238
Température 200 °C -
Charge 5 kg -
Retrait au moulage , parallèle 0.012 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module à 100% allongement 2.55 MPa ASTM D 412
Module à 300% allongement 1.11 MPa ASTM D 412
Dureté A Shore 65 - ASTM D 2240
Résistance au déchirement 40.3 kN/m ASTM D 624
Compression rémanente, 22 hr @ 73 °F 35 % ASTM D 395
Résistance de traction à la rupture 7.64 MPa ASTM D 412
Allongement à la rupture 710 % ASTM D 412
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
UL 94 inflammabilité HB - UL 94
Épaisseur testée 1.5 mm -
Propriétés diversesValeurUnitéNorme du test
Densité 1170 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 48.9 - 54.4 °C -
Pré-séchage - temps 3 - 4 h -
Température du moule 21.1 - 37.8 °C -
Zone 1 163 - 188 °C -
Zone 2 182 - 199 °C -
Zone 3 188 - 210 °C -
Température de la buse 193 - 216 °C -
Vitesse de rotation de vis 25 - 75 rpm -
Vitesse d'injection 12.7 - 50.8 mm/s -
Contre-pression 0 - 0.552 MPa -
Pression de maintien 0.414 - 1.86 MPa -
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés, Couleurs naturelles
Caractéristiques
Bonne adhérence
Applications
IT / Machine de bureau, Électrotechnique et électrique
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.