Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESPEL® TP-8311 - PI - DuPont Engineering Polymers

Material Data Center offers the following functions for VESPEL® TP-8311:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vespel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de traction 151 MPa ASTM D 638
Allongement à la rupture 4 % ASTM D 638
Résistance de compression 44 MPa ASTM D 695
Résistance à la flexion 215 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 92 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Inflammabilité ep. nom. 1.5 mm V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 1.5 mm -
Inflammabilité pr. épaisseur h V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 0.8 mm -
ASTM Data
UL 94 inflammabilité V-0 - UL 94
Épaisseur testée 1.5 mm -
coefficient de dilatation thermique, long. 17 E-6/K ASTM D 696
Coefficient de dilatation thermique, trav. 50 E-6/K ASTM D 696
DTUL à 264 psi 244 °C ASTM D 648
Température de transition vitreuse 249 °C ASTM E 1356
Propriétés diversesValeurUnitéNorme du test
Absorption d’eau, 24hr 0.11 % ASTM D 570
Densité 1380 kg/m³ ASTM D 792
Caractéristiques
Conditionnement
Couleurs naturelles
Additifs
Lubrifiant
Propriétés spéciales
Ignifugé, Stabilisé à la chaleur
Caractéristiques
Grade tribologique, Soudable
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.