Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAKEEP® i4 3DF - PEEK - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAKEEP® i4 3DF:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestakeep datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 12 / * cm³/10min ISO 1133
Température 380 / * °C -
Charge 5 / * kg -
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 3500 / - MPa ISO 527
Résistance à la traction 94 / - MPa ISO 527
Contrainte d'écoulement 94 / - MPa ISO 527
Déformation au seuil d'écoulement 5 / - % ISO 527
Contrainte à la rupture 76 / - MPa ISO 527
Résistance au choc Charpy, +23°C N / - kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C N / - kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 6 / - kJ/m² ISO 179/1eA
Type de défaillance C / - - -
Résistance au choc Charpy (entaillé), -30°C 9.1 / - kJ/m² ISO 179/1eA
Type de défaillance C / - - -
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 338 / * °C ISO 11357-1/-3
Température de transition vitreuse, 10°C/min 152 / * °C ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa 150 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 205 / * °C ISO 75-1/-2
Température de ramolliss. Vicat, A 335 / * °C ISO 306
Température de ramolliss. Vicat, B 305 / * °C ISO 306
Inflammabilité pr. épaisseur h V-0 / * class IEC 60695-11-10
Epaisseur de l'éprouvette 3.2 / * mm -
ASTM Data
Température de fusion 338 °C ASTM D 3418
Propriétés diversessec / condUnitéNorme du test
Masse volumique 1300 / - kg/m³ ISO 1183
Densité 1300 kg/m³ ASTM D 792
Caractéristiques
Transformation
Additive Manufacturing
Conditionnement
Monofilament, Couleurs naturelles
Propriétés spéciales
Stabilisé à la chaleur
Caractéristiques
Stabilité thermique
Résistance Chimique
Résistance aux acides, Résistance aux alcalis , Résistance chimique générale, Résistance aux solvants, Résistance aux graisses, Stabilité hydrolytique, Résistance aux huiles
Certifications
Grade médical, Biocompatibility ISO 10993, USP Class VI approbation
Applications
Médical
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.