Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® X7297 BK 9.7507 - PA12-I - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® X7297 BK 9.7507:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
High viscosity, plasticized, impact-modified, heat- and light stabilized PA 12 compound

VESTAMID® X7297 BK 9.7507 is a plasticized polyamide 12 compound with heat and light stabilizer for the extrusion of flexible tubing and hose especially for automotive applications.

 

VESTAMID® X7297 BK 9.7507 is characterized by easy processing as well as high impact strength at low temperatures.

 

Properties of compounds based on polyamide 12 vary little with changing humidity due to low moisture absorption. Parts made of this semi-crystalline material are characterized by exceptional impact strength, low coefficient of friction and good chemical resistance.
 

VESTAMID® X7297 BK 9.7507 is supplied as cylindrical pellets, ready for processing, in moisture-proof bags.

Pigmentation may affect values.
  
Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 13 / * cm³/10min ISO 1133
Température 230 / * °C -
Charge 5 / * kg -
Retrait au moulage, parallèle 0.9 / * % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 1.3 / * % ISO 294-4, 2577
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 390 / 390 MPa ISO 527
Contrainte d'écoulement 26 / 25 MPa ISO 527
Déformation au seuil d'écoulement 37 / 37 % ISO 527
Déformation nominale à la rupture >50 / >50 % ISO 527
Résistance au choc Charpy, +23°C N / N kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C N / N kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 122 / 130 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 6 / 8 kJ/m² ISO 179/1eA
Type de défaillance C / C - -
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 171 / * °C ISO 11357-1/-3
Température de transition vitreuse, 10°C/min 41 / * °C ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa 51 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 135 / * °C ISO 75-1/-2
Température de ramolliss. Vicat, B 125 / * °C ISO 306
Propriétés électriquessec / condUnitéNorme du test
ISO Data
Permittivité relative, 100Hz 11.4 / 13.7 - IEC 62631-2-1
Permittivité relative, 1MHz 3.6 / 3.8 - IEC 62631-2-1
Facteur de pertes, 100Hz 1850 / 2260 E-4 IEC 62631-2-1
Facteur de pertes, 1MHz 1040 / 1570 E-4 IEC 62631-2-1
Résistivité transversale 3.3E9 / 6.3E8 Ohm*m IEC 62631-3-1
Rigidité diélectrique 36 / 36 kV/mm IEC 60243-1
Propriétés diversessec / condUnitéNorme du test
Absorption d'eau 1.4 / * % Sim. to ISO 62
Absorption d'humidité 0.8 / * % Sim. to ISO 62
Masse volumique 1020 / - kg/m³ ISO 1183
Caractéristiques
Transformation
Extrusion de tubes, Extrusion (autres)
Conditionnement
Granulés, Noir
Additifs
Plastifiant
Propriétés spéciales
Modifié choc, Stabilisé à la lumière, Stabilisé aux intempéries, Stabilisé à la chaleur
Caractéristiques
Grade tribologique
Résistance Chimique
Résistance chimique générale
Applications
Automobile
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.