Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® R435H BK0757 - PA66-GF35 - Ascend

Material Data Center offers the following functions for Vydyne® R435H BK0757:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
Vydyne R435H BK0757, is designed to reinforce downgauged steel and aluminum used in vehicle body-in-white (BIW) structures, helping reduce weight without sacrificing safety or comfort.
R435H BK0757 has improved energy absorption over traditional glass-filled PA66, helping reduce noise, vibration and harshness (NVH) and absorbing impact energy from crashes. Using the new grade in the BIW structure reinforces sheet metal, helping manufacturers shave substantial weight and improve efficiency. Trends in lightweight and NVH are becoming even more paramount with the growth of Electric Vehicles. R435H BK0757 has excellent properties to support applications where this will be of prime importance such as battery frames and housings.
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 11300 / - MPa ISO 527
Contrainte à la rupture 173 / - MPa ISO 527
Déformation à la rupture 2.9 / - % ISO 527
Module de flexion, 23°C 10100 / - MPa ISO 178
Résistance à la flexion 260 / - MPa ISO 178
Résistance au choc Charpy, +23°C 93 / - kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 18 / - kJ/m² ISO 179/1eA
Résistance au choc Izod avec entaille, +23°C 17 / - kJ/m² ISO 180/1A
Résistance au choc Izod avec entaille 13 / - kJ/m² ISO 180/1A
Température -40 °C -
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 262 / * °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 248 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 260 / * °C ISO 75-1/-2
Propriétés diversessec / condUnitéNorme du test
Absorption d'humidité 1.38 / * % Sim. to ISO 62
Masse volumique 1390 / - kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 80 °C -
Pré-séchage - temps 4 h -
Température de la matière fondue 285 - 305 °C -
Température du moule 65 - 95 °C -
Zone 1 280 - 310 °C -
Zone 2 280 - 310 °C -
Zone 3 280 - 310 °C -
Température de la buse 280 - 310 °C -
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés, Noir
Additifs
Lubrifiant
Propriétés spéciales
Modifié choc, Stabilisé à la chaleur
Caractéristiques
Propriétés barrière acoustique
Résistance Chimique
Résistance chimique générale, Résistance aux solvants, Résistance aux huiles
Applications
Automobile, Carter
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.