Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of WELLAMID 6600 GS 50 HWCP - PA66-GB50 - CP-Polymer-Technik GmbH & Co.KG

Material Data Center offers the following functions for WELLAMID 6600 GS 50 HWCP:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Wellamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Retrait au moulage, parallèle 1.0 / * % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 1.5 / * % ISO 294-4, 2577
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 5500 / 2900 MPa ISO 527
Résistance à la traction 88 / 63 MPa ISO 527
Déformation à la rupture 4 / 14 % ISO 527
Module de flexion, 23°C 4900 / - MPa ISO 178
Résistance au choc Charpy, +23°C 30 / 60 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 7 / 17 kJ/m² ISO 179/1eA
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 262 / * °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 130 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 205 / * °C ISO 75-1/-2
Température de ramolliss. Vicat, B 230 / * °C ISO 306
Coeffic. de dilatation therm. linéique, parallèle 35 / * E-6/K ISO 11359-1/-2
Inflammabilité ep. nom. 1.5 mm HB / * class IEC 60695-11-10
Epaisseur de l'éprouvette 1.5 / * mm -
Inflammabilité pr. épaisseur h HB / * class IEC 60695-11-10
Epaisseur de l'éprouvette 1.2 / * mm -
Propriétés électriquessec / condUnitéNorme du test
ISO Data
Permittivité relative, 1MHz 4 / 6 - IEC 62631-2-1
Facteur de pertes, 1MHz 150 / 1500 E-4 IEC 62631-2-1
Résistivité transversale 1E13 / 1E10 Ohm*m IEC 62631-3-1
Résistivité superficielle * / 1E10 Ohm IEC 62631-3-2
Rigidité diélectrique 35 / 35 kV/mm IEC 60243-1
Indice de résistance au cheminement 450 / - - IEC 60112
Propriétés diversessec / condUnitéNorme du test
Absorption d'humidité 1.2 / * % Sim. to ISO 62
Masse volumique 1570 / - kg/m³ ISO 1183
Caractéristiques
Propriétés spéciales
Stabilisé à la chaleur
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.