Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Zylar® 650 - MBS - INEOS Styrolution

Material Data Center offers the following functions for Zylar® 650:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Zylar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés optiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 4 cm³/10min ISO 1133
Température 200 °C -
Charge 5 kg -
ASTM Data
Indice de fluidité, MFI 4 g/10min ASTM D 1238
Température 200 °C -
Charge 5 kg -
Retrait au moulage , parallèle 0.004 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2100 MPa ISO 527
Contrainte d'écoulement 26 MPa ISO 527
Module de flexion, 23°C 1930 MPa ISO 178
Dureté Rockwell R 84 - ISO 2039-2
ASTM Data
Module en traction 2137 MPa ASTM D 638
Module de traction d’élasticité 26.2 MPa ASTM D 638
Allongement à la rupture 40 % ASTM D 638
Module de flexion 1931 MPa ASTM D 790
Résistance à la flexion 48.3 MPa ASTM D 790
Dureté Rockwell R 84 - ASTM D 785
Gardner au choc 16.9 J ASTM D 2794,4226,5420
Izod choc avec entaille, 1/8 in 160 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
Vicat température 98.9 °C ASTM D 1525
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Haze 2 % ASTM D 1003
Lumière á Transmittance 90 % ASTM D 1003
Indice de réfraction 1.57 - ASTM D 542
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.1 % Sim. to ISO 62
Absorption d'humidité 0.05 % Sim. to ISO 62
Absorption d’eau, équilibre 0.1 % ASTM D 570
Densité 1040 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Modifié choc, Stérilisable, Stérilisation par oxyde d'éthylène (EtO), Stérilisation par rayonnement gamma
Caractéristiques
Copolymère
Résistance Chimique
Résistance au rayonnement
Certifications
Contact alimentaire, Approuvé pour le contact alimentaire suivant 10/2011, FDA 21 CFR approbation, Grade médical, Biocompatibility ISO 10993, USP Class VI approbation, Drug Master File, Long term supply assurance
Applications
Médical
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.