Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BMC RF A 100/18 - UP-(MD+GF)70 - Polynt S.p.A.

Material Data Center offers the following functions for BMC RF A 100/18:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Retrait au moulage, parallèle 0.2 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Résistance au choc Charpy, +23°C 25 kJ/m² ISO 179/1eU
Dureté Rockwell M 80 - ISO 2039-2
Other Standards[S]
Module de flexion, 23°C 9000 MPa ISO 14125A
Résistance à la flexion 70 MPa ISO 14125A
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Inflammabilité pr. épaisseur h V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 3.2 mm -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Résistivité transversale 1E12 Ohm*m IEC 62631-3-1
Résistivité superficielle 1E14 Ohm IEC 62631-3-2
Indice de résistance au cheminement 600 - IEC 60112
ASTM Data
Résistance à l’arc 180 s ASTM D 495
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.2 % Sim. to ISO 62
Masse volumique 1800 kg/m³ ISO 1183
Caractéristiques
Transformation
Moulage par compression
Conditionnement
Moulage en vrac
Propriétés spéciales
Ignifugé
Résistance Chimique
Résistance aux acides, Résistance aux alcalis
Applications
Électrotechnique et électrique
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.