Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Badamid® UL B70 GF25 FR V0 - PA6-GF25 - Bada AG

Material Data Center offers the following functions for Badamid® UL B70 GF25 FR V0:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Badamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 10500 / 7500 MPa ISO 527
Contrainte à la rupture 155 / 85 MPa ISO 527
Déformation à la rupture 2.5 / 3.5 % ISO 527
Résistance au choc Charpy, +23°C 60 / 72 kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C 45 / - kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 15 / 18 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 12 / - kJ/m² ISO 179/1eA
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 222 / * °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 205 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 215 / * °C ISO 75-1/-2
Inflammabilité ep. nom. 1.5 mm V-0 / * class IEC 60695-11-10
Epaisseur de l'éprouvette 1.6 / * mm -
Yellow Card disponible oui / * - -
Inflammabilité pr. épaisseur h V-0 / * class IEC 60695-11-10
Epaisseur de l'éprouvette 0.8 / * mm -
Yellow Card disponible oui / * - -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (1) 0.8 mm -
Glow Wire Ignition Temperature (GWIT) 750 °C IEC 60695-2-13
GWIT - thickness tested (1) 0.8 mm -
Glow Wire Ignition Temperature (GWIT) 750 °C IEC 60695-2-13
GWIT - thickness tested (2) 1.6 mm -
Propriétés électriquessec / condUnitéNorme du test
ISO Data
Permittivité relative, 1MHz 3.8 / 4.6 - IEC 62631-2-1
Facteur de pertes, 1MHz 170 / 1000 E-4 IEC 62631-2-1
Résistivité transversale 1E11 / 1E8 Ohm*m IEC 62631-3-1
Résistivité superficielle * / 1E12 Ohm IEC 62631-3-2
Indice de résistance au cheminement 500 / - - IEC 60112
Propriétés diversessec / condUnitéNorme du test
Absorption d'eau 4.3 / * % Sim. to ISO 62
Absorption d'humidité 1.6 / * % Sim. to ISO 62
Masse volumique 1390 / - kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 80 °C -
Pré-séchage - temps 2 - 4 h -
L'humidité de traitement ≤0.15 % -
Température de la matière fondue 260 - 290 °C -
Température du moule 80 - 90 °C -
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Ignifugé
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.